
TP Series TP585 / TP1012 Positioner Match JRD-FT8 Crimping Tool for M39029,M24308 and NGC Connector contacts
14,13 €
Preis je Ausführung: 14,13 € – 14,14 € · Preis für die ausgewählte Ausführung
● Verfügbar
TP Series Single Position Head TP Series single positioner head is easily removed and changed. It is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp
Produktdetails
TP Series Single Position Head
TP Series single positioner head is easily removed and changed.
It is used to locate contacts horizontally and vertically between the indenters of the tools to ensure the accuracy and consistency of the crimp position.Gives a standardized and accurate crimp every time
- 1.Works with JRD-FT8 crimping tool.
- 2.Gives a standardized and accurate crimp every time.
- 3.The data plate on the positioner designates which contacts the single position head accommodates.
Number | Model | MIL standard | Compatible contacts model |
1 | TP1012 | / | TE Connectivity / DEUTSCH NGC Connector contacts |
2 | TP85 | M22520/1-07 | MS18232,MS18233 |
3 | TP360 | M22520/1-09 | M39029/18-180, M39029/17-175, M39029/18-180 , M39029/16-170 |
4 | TP465 | M22520/1-11 | M39029/93-540, M39029/94-604, M39029/11-147, M39029/12-151 |
5 | TP585 | / | M24308/10-1, M24308/11-1, M39029/64-369, M39029/64-657, M39029/63-368, M39029/63-656, M39029/93-598, M39029/94-602 |
Single positioner head installing
1.Keep the crimp tool in open position
2.Place selected single positioner head assembly onto retainer ring with socket head screws lined up with tapped holes.
3.After single positioner head is seated against retainer ring, tighten socket head screws.
4.single positioner head installation is completed.
Artikelnummer: DETLSEISENL20260710100024
Marke: JRready tools
Versand & Rückgabe
Die verfügbaren Versandarten und Kosten werden im Checkout anhand Ihrer Lieferadresse angezeigt.
Weitere Informationen


